Take a look at the SMOK SCAR P3 80W Pod Mod Kit, which works with the well-known SMOK RPM Coil Series and has a 5-80W range with an integrated 2000mAh battery. Light falls and drops cannot penetrate the SMOK SCAR-P3’s chassis since it is made of a sturdy zinc alloy.

With an output range of 5 to 80 watts, the SCAR-P3 Pod System is compatible with the SMOK RPM Coil Series and produces flavorful vapor in either MTL or DTL mode, depending on the coil that is fitted. The SMOK SCAR-P3 has intelligent atomizer identification, which allows it to identify the type of installed coil for improved performance.

SMOK SCAR-P3 80W Pod Mod Kit Features:

• IQ-80 Chipset
• Dimensions: 110mm by 32.3mm by 27mm
• Integrated 2000mAh Rechargeable Battery
• Wattage Output Range: 5-80W
• Voltage Output Range: 0.5–4V
• Resistance Range: 0.2-2.5 ohm
• Zinc-Alloy Chassis Construction
• Single Intuitive Firing Button
• 0.96″ TFT Color Screen
• Two Adjustment Buttons
• 5.5mL Refillable Pod Capacity
• Side Fill System: Silicone-Stopped
• SMOK RPM Coil Series
• 0.4-ohm RPM Mesh coils, rated for 25W
• 0.16ohm RPM, 2 Mesh coils, rated for 25–50W
• Press Fit Coil Installation
• Dual Airflow System: MTL and DTL Vaping
• Magnetic Pod ConnectionUSB Type-C Port
  Available in Black, Fluid Black Grey, Fluid Red, Fluid Blue, Fluid Green, Red, Prism Rainbow, and Fluid 7-Color

Includes:

• 1 SCAR-P3 Pod Mod
• 1 0.4ohm RPM Mesh Coil
• 1 0.16ohm RPM 2 Coil
• 1 SCAR P-3 RPM Pod
• 1 SCAR P-3 RPM 2 Pod
• 1 USB. Type-C Cable
• 1 User Manual

Make sure to properly prime each coils and pods before use.

Note: If the coil has a sub-ohm resistance, please make sure you know exactly how to utilize mods and batteries that are compatible with sub-ohm coils. Use of a flat or short 510 connector on any hybrid or hybrid-style device is not recommended. Please do not use it if you are unfamiliar with or uncertain about any specific items or setups. Always take the right handling and safeguards.

It should be noted that utilizing rechargeable batteries carries a danger at all times and in all situations. Any harm resulting from altering the batteries, chargers, gadgets, or other products we carry in any way, including the creation of packs, is not the responsibility of ElementVape.com or any of its parent or subsidiary companies.

The incorrect use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer), and any rechargeable battery or batteries as well as chargers may result in permanent or temporary injury, damage, or defect for which ElementVape.com and any or all of its parent and subsidiary companies shall not be held accountable or liable. Please learn more about the batteries and chargers you use and how to take good care of them.

Please exercise caution and care while working with Li-ion (lithium-ion), LiPo (lithium-ion polymer), and any other rechargeable cells since they are extremely sensitive to charging characteristics and can burn or explode if handled improperly. Before using any rechargeable batteries, please ensure you are well-versed in their usage. Batteries should always be charged on a spotless, fireproof surface. Never leave batteries charging alone. Please do not use the batteries if you see any obvious damage to them. Rechargeable cells should always be handled, stored, and transported in a controlled environment in a secure, non-conductive container.